

The code first creates an array of length d containing the triplet values. It then loops through the array, counting up from 0 to max - 1. For each element in the array, the code calculates the maximum value in the array and assigns that value to the variable result. The code then increments the count variable by 1. Finally, the code returns the result variable.

beautifulTriplets.js



The function KaprekarNumbers takes two numbers p and q and calculates the kaprekar number for them. The kaprekar number is the sum of the digits in each number up to the number "i". If the two numbers are equal, the number "i" is included in the result. The function checks to make sure the range of numbers being processed is within the limits of what is possible, and if not it outputs an error message.

kaprekarNumbers.js


The permutation equation calculates the permutation of an array. The index of an element is incremented by 1 and then added to the index of the element preceding it in the array.

permutationEquation.js


The code in this function rotates an array by a certain amount every time it is called. It starts at position 0, and increments the index by 1 for each call. It then uses the reduction operator to modify the target array to reflect the new position of the index.

circularArrayRotation.js



The saveThePrisoner function will save the prisoner at index n with value s + m - 1.

saveThePrisoner.js



The viralAdvertising() function will set a shared variable to 5 and then loop through the given number of iterations. Each iteration will increase the shared variable by 1/2 and then add the value of the shared variable to the cumulative variable. The last step will set the shared variable to the cumulative variable.

viralAdvertising.js



The above code calculates the ramp up percentage for a given map based on the number of fact people per period. If the number of fact people per period is "5", the code returns "Ramped up". If the number of fact people per period is "1", the code returns "Ramping". If the number of fact people per period is "2", the code returns "Ramping". If the number of fact people per period is "3", the code returns "Ramping". If the number of fact people per period is "4", the code returns "NA".

Employee tenure



This code converts a string to a number. First, it checks if the string is null or if the number of rows is less than 1. If either of these conditions is true, the code returns an empty string.
If the number of rows is not 1, the code loops through the string and converts each character to a number. The step value is 2 multiplied by the number of rows - 2, so the code loops through the string twice. The first time, it loops through the string from the beginning to the first character that is greater than or equal to the number 2. The second time, it loops through the string from the second character after the first character that is greater than or equal to the number 2 to the end of the string. The code stores the numbers that are greater than or equal to 2 in a new variable called result. The code then returns the result variable.

zigzagConversion.js

The code displays the time in the console: hours minutes seconds.

Example:

**18:22:13**

------------------------------------------------------------------------------------------
Код выводит время в консоли: часы минуты секунды.

Пример:

**18:22:13**

Clock



This code creates a safe area that consists of a Column and a TextButton. The Column has two children, the first of which is a TextButton which will be triggered when the user presses it. The second child is a const Text which is displayed when the TextButton is clicked.

VerifyEmailView

final add.dart

Animated SVG circle stroke on hover

flask



The code creates a response object and sets the response's data and mimetype properties. It then returns the response.

Manipulate files using Flask templating



The code POSTs a JSON with a single body parameter. The Body constructor takes an arbitrary number of arguments, but only the first two are required. The embed argument indicates whether or not the body should be embedded in the response.

post a single body parameter in FastAPI



The code prints "Hello world" on the screen.

Snippet



difference between the list of missing entries and the origin list is:

Arrays.asList("A", "B", "C", "D", "E", "F", "G", "H") - Arrays.

Stream find missing items on one array vs other

Stream map ordering comparison



The code imports a list of lines from a file as an array.

array to arraylist



A list of strings that will be used as the line endings for the file being imported.


The following code demonstrates how to create a simple Glitch container with two text elements, an ELISABÉTH element for the text content, and a GLOW element for the user-selectable outline.

Each text element has a data-text attribute which is set to ELISABÉTH .

The GLOW element has a data-text attribute which is set to ELISABÉTH .

The GLOW element also has a data-opacity attribute which is set to 0.5 to make it 50% opaque.

The GLOW element has a data-duration attribute which is set to 3000 to make it stay on the screen for 3 seconds.


The following is the CSS code for the project:

.container {
width: 100%;
height: 100%;
}


.glitch {
display: inline-block;
width: 100%;
height: 100%;
}


.glow {
opacity: 0.5;
z-index: 1;
position: absolute;
left: 0;
top: 0;
}


.subtitle {
display: inline-block;
font-size: 20px;


Text Gltich Effect - HTML, SCSS

react


There are a few pieces of this code:

import { createEntityAdapter, createSelector } from "@reduxjs/toolkit";
import { apiSlice } from "./../api/apiSlice";
const categoryAdapter = createEntityAdapter({
  selectId: (category) => category.id,
  sortComparer: (a, b) => a.id.localeCompare(b.id),
});

const initialState = categoryAdapter.getInitialState();

This creates an entity adapter that will handle the retrieval of categories by ID. The sort comparer will use the localeCompare function to compare the IDs of the two categories.

export const categorySlice = apiSlice.injectEndpoints({
  endpoints: (builder) => ({
     getCategories: builder.query({
      query: () => "/categories",
       transformResponse: (responseData) => {
       return categoryAdapter.setAll(initialState, responseData);
      },
       transformErrorResponse: (responseData

Redux toolkit query slice


The code updates the document product's catalog code and states.

fix old mxik

angular



The code looks for a chartType and sets it to the appropriate type.

ChangeGraph



This will create a virtualenv called "my-env" with the Python 3.8.5 installed in it.

Pyenv create a virtualenv

django



The following command will print the name of the current pip package.

Pip show packages without version





The code first requires the bcrypt library. Next, it creates a new salt and stores it in a variable. Next, it generates a hash of the user's password using the bcrypt library. Finally, it compares the hash of the user's password with the hash of the not_a_password string to determine if the two strings are the same.

hash password

read csv - test



The code specifies a simple configuration for an H2 in-memory database.

H2 datasource config for an in-memory H2 database



The code fragment above sets up the Hibernate settings for the application. The first line sets up the location of the Hibernate binaries; this value should be the same as the value of the HIBERNATE_BINARY_DIR setting in the JVM parameter file. The dialect should be set to the dialect of the database that the application is using; in this case, it is set to the SQLServer2008Dialect.
The next setting is the dbcreate configuration property. This setting tells Hibernate how to create the database for the application. The only valid value for this property is "update".
The next two lines disable the secondary cache and specify the ehCache cache provider.
The last two lines specify the log SQL and event handling settings. The log SQL setting tells Hibernate to log all SQL statements that are executed by the application. The event handling setting tells Hibernate to run the cborm.models.EventHandler class when any events occur.
The last line enables the Hibernate ORM session management settings. The flushAtRequestEnd setting tells Hibernate to flush the session at the end of each request. The autoManageSession setting tells

ORMSettings

Perceptron Predictions



This code extracts the value for the first two rows of the data frame.

Get value from dataframe



This line creates a dataframe with column int.

Cast pandas column to int



This code sets the value of df['column'] to the string 'column'.

Cast pandas column to String

Pandas

Use date time as index, highly preferred for time series analysis. 

Date time as index



The code selects all rows from the ORDER_SERVICES table where the number_request_internal column is blank.

Queries mais usadas


This prints "hello world" onto the console.

aksh

Apex Print


This code sets the browser emulation feature for the process named "Microsoft Internet Explorer" to 99999.

WinFormsEdgeBrower



In the code, the user enters an integer and the code parses it and prints out the result. The user's number divided by the number of sides gives the result.

Test

kkkk

The string "okkkkkkkkk" is a valid input for the console.

AntiCheat Removal

Actual MergeSort (W04)

  elif Input.is_action_pressed("move_right_key"):
  sprite.frame = DIRECTION_TO_FRAME[direction_key]
  sprite.flip_v = sign(direction.y) == -1
  elif Input.is_action_pressed("move_left_key"):
  sprite.frame = DIRECTION_TO_FRAME[direction_key]
  sprite.flip_h = sign(direction.x) == 1
  elif Input.is_action_pressed("move_up_key"):
  sprite.frame = DIRECTION_TO_FRAME[direction_key]
  sprite.flip_v = sign(direction.y) == 1
  elif Input.is_action_pressed("move_down_key"):
  sprite.frame = DIRECTION_TO_FRAME[direction_key]
  sprite.flip_h = sign(direction.y) == -1

if Input.is_action_pressed("move_right_key"): 
 sprite.frame = DirectionToFrame[direction_key] 
 sprite.flip_

Four way movement


# - If a is larger then b, then the value of a will be added to the value of b and the result will be returned. 
# Otherwise, the value of b will be added to a and the result will be returned.

Beginer Learning 1

  if direction_key in DIRECTION_TO_FRAME:
  player_sprite.flip_h = sign(direction.x) == -1

The code describes a physics process where the player's position and velocity are calculated. The code then uses a trick to round down the direction to a 24-character line strip, which is then used to position the player's sprite onscreen. If the direction_key is found in the DIRECTION_TO_FRAME list, the sprite's frame is set to the corresponding value from the list, and the flip_h variable is set to the sign of the direction_key's x value. If the direction_key isn't found in the DIRECTION_TO_FRAME list, the sprite's frame is set to the default value of 0.

Eight way movement

  get_node("Timer").stop()
 
  if Input.is_action_just_pressed("boost"):		direction = Vector2.ZERO 
  
  _process(0.5 * delta)

This code extends Sprite and defines three variables: boost_speed, normal_speed, and max_speed. max_speed is the speed that the player will move at.Normal speed is set to 600 and boost_speed is set to 1500.Velocity is set to Vector2.ZERO, which means that the player is at (0,0). Drag_factor is set to 0.1 to give the player a bit of drag. _process() is called whenever the player moves their left or right stick. If the player is moving up or down, _process() is called with a different delta value. If the player presses the "boost" key, _process() sets max_speed to the boost_speed and gets the node "Timer" started. _process() then sets desired_velocity to the direction * max_speed and calculates the steering_vector by subtracting velocity from desired_velocity - velocity. Velocity is then increased by the steering_vector * drag_

Ship movement



The code defines a function called "angryProfessor" that takes two arguments, "k" and "a". The function accepts a numeric value, called "k", and a boolean value, called "a". The "angryProfessor" function will only execute if the boolean value "a" is equal to or greater than 1. If "a" is equal to or less than 1, the function will return a string value, "NO". If "a" is not equal to or less than 1, the function will return a string value, "YES".

angryProfessor.js


The following code creates an "utopian tree" that grows faster the more often it is cycled. The function creates a loop that keeps track of the cycle number, as well as the height of the tree. The code cycles through the loop at a rate of 1 per 2.

utopianTree.js



The beautifulDays function takes three arguments, an integer starting at 1, a number starting at 1, and a number ending at 2. It creates an array called beautiful, and loops through each of the numbers starting at 1 and going up to and including the number ending at 2.
At each loop, it creates a variable called numString and sets it to the string consisting of the number starting at 1 followed by a space and the number ending at 2. Then, it sets the variable reverse to the reverse of numString, which is the string made up of the number starting at 2 followed by a space and the number ending at 1. Finally, it adds the string "1" to the end of reverse and stores it in the variable start.

The beautifulDays function will then return the length of the beautiful array, which in this case is 3.

beautifulDays.js



This code retrieves the best rank for a given score from a sorted list of unique scores. The ranks are returned as an array of integers.

climbingLeaderboard.js

This one-liner takes a `myArray` input and processes it using a Java stream to remove all duplicate array elements. The result is returned as a native CFML array with full support for array methods, including array member functions like myArray.first().

Name	Language	Author	Uses
beautifulTriplets.js	JavaScript	RN Rahman Niftaliyev	0
kaprekarNumbers.js	JavaScript	RN Rahman Niftaliyev	0
permutationEquation.js	JavaScript	RN Rahman Niftaliyev	0
circularArrayRotation.js	JavaScript	RN Rahman Niftaliyev	0
saveThePrisoner.js	JavaScript	RN Rahman Niftaliyev	0
viralAdvertising.js	JavaScript	RN Rahman Niftaliyev	0
Employee tenure	Swift	KW Keivan Work	0
zigzagConversion.js	JavaScript	RN Rahman Niftaliyev	0
Clock	C++	c cnet-sudo	0
VerifyEmailView	Dart	S Sumiran Dahal	0
final add.dart	Dart	A Ali-ElGamal	0
Animated SVG circle stroke on hover	HTML	AK Audrius K	0
Manipulate files using Flask templating	Python	R RF-Fahad-Islam	0
post a single body parameter in FastAPI	Python	HB Huang Brandon	0
Snippet	Python	JP Jakub Parasiak	0
Stream find missing items on one array vs other	Java	MA Manuel Antunes	0
Stream map ordering comparison	Java	MA Manuel Antunes	0
array to arraylist	Java	MA Manuel Antunes	0
array to arraylist	Java	MA Manuel Antunes	0
Text Gltich Effect - HTML, SCSS	SCSS	AK Audrius K	0
Redux toolkit query slice	JavaScript	Y YusifHasanov	0
fix old mxik	SQL	M Muhammadali-gold	0
ChangeGraph	TypeScript	pc paolo costantini	0
Pyenv create a virtualenv	Python	N Neuron123	0
Pip show packages without version	Python	N Neuron123	0
hash password	JavaScript	wn wongsatorn n	0
read csv - test	Python	t thiagotims	0
H2 datasource config for an in-memory H2 database	Coldfusion	MB Michael Born	2
ORMSettings	Coldfusion	MB Michael Born	0
Perceptron Predictions	Python	LD Logan Demir	0
Get value from dataframe	Python	JP Javier Pacheco	0
Cast pandas column to int	Python	JP Javier Pacheco	0
Cast pandas column to String	Python	JP Javier Pacheco	0
Date time as index	Python	WS Wyx Smrf	0
Queries mais usadas	SQL	DG Diego Gabriel	0
aksh	Python	d devilsaksh	0
Apex Print	Apex	SC Smooth Criminal	0
WinFormsEdgeBrower	C#	KT Kim Too Flex	0
Test	C#	AB Alex Belov	0
AntiCheat Removal	C++	kg keone gouveia	0
Actual MergeSort (W04)	Java	a anlinn	0
Four way movement	Python	CF Codiga Fan #25880	2
Beginer Learning 1	Python	CF Codiga Fan #25880	0
Eight way movement	Python	CF Codiga Fan #25880	0
Ship movement	Python	CF Codiga Fan #25880	1
angryProfessor.js	JavaScript	RN Rahman Niftaliyev	0
utopianTree.js	JavaScript	RN Rahman Niftaliyev	0
beautifulDays.js	JavaScript	RN Rahman Niftaliyev	0
climbingLeaderboard.js	JavaScript	RN Rahman Niftaliyev	0
Remove Duplicate Array Items	Coldfusion	MB Michael Born	1

Codiga Snippets, page 16