

The rotate function takes two arguments, nums and k. nums is an array of numbers, and k is the number of positions to rotate the array by. The rotate function loops through each number in the nums array, and assigns the corresponding number from arr to nums[i].

rotate.js


This code uses a recursion algorithm - dfs - to create a list of parentheses. The algorithm works as follows:

First, it checks to see if left and right are equal - if they are, then the parentheses are created and the string "(" is appended to the result.

Next, it checks to see if left is greater than 0 - this is done because the parentheses will be created at the leftmost and rightmost positions, depending on the value of left .

If left is greater than 0, then dfs() is called with left - 1 as the first parameter, right as the second parameter, and the string "(" is appended to the result.

If right is greater than left, then dfs() is called with left, right - 1 as the first parameter, and the string ")")" is appended to the result.

generateParenthesis.js



The memset() function will initialize all of the memory within the t array to -1.

1D_DP_template



The code sorts the values in Column1, Column2, and so on, according to their values in ascending order.

Sort a Pandas Dataframe Colum

react


The code uses a function call to call a stored function, and then uses an event handler to call the stored function every delay milliseconds.

useInterval



The code creates a function called Counter with two properties, count and setCount. The function saves a callback function as savedCallback. The function Counter calls the callback function every 1000 milliseconds using an effect. The function Tick calls the callback function and saves the current value of savedCallback. The code returns the HTML title for the Counter.

React hooks counter



The code first retrieves the hostname from the DNS server. It then loops through the array of IP addresses found in the retrieved hostname. For each IP address, it checks to see if the IP address is of the InterNetwork type. If it is, it prints out the IP address and then terminates the loop.

Find Device HostName and Ipv4 address

Youtube dl téléchargement audio en simultané



This defines a container that will hold all other elements within the document.

flrecomm



A div is a block of text that can contain other blocks of text.

blome-snippet



This code is an example of using an interval timer. The interval timer is defined as an object called fxTimer . The interval timer lasts for 1000 milliseconds and it is set to run once every time the sessionStorage.getItem('fxtimer') function is called. If the value of the fxTimer object is 'sent', then the interval timer is disabled. If the value of the fxTimer object is not 'sent', then the interval timer is enabled and it will run every 1000 milliseconds.

Time Spent on Website



The code will rename all the column in the dataframe to the specified values.

Replace column name on Pandas Dataframe


Create table = CREATE TABLE name_of_table (column1 data type, column2 data type);

When the code is executed, the database "name_of_database" and the table "name_of_table" are created.

Postgres cheat sheet

.sql

The code pg_dump postsQL dumps the contents of the current server's postgreSQL database to the file myBackupFile.sql.

Postgres dump data(NOT in container)



This code defines a function to print the phrase "Hello word" onscreen.

hello



This command will dump all of the data in the postgres database to a file named dump_2018-06-15_13-41-24.sql .

The -t flag tells Docker to run the command in a terminal. The <your-postgres-container-id> refers to the ID of the container that you created to run PostgreSQL. The -c flag tells PostgreSQL to dump the data instead of working with it. The -U flag tells PostgreSQL to use the user postgres instead of the default user root . The > dump_`date +%d-%m-%Y"_"%H_%M_%S`.sql tells Docker to append the output of the command to the filename dump_2018-06-15_13-41-24.sql .

Postgres dump data in container

The core functionality of algorithms.

for NA adding imperial units coming by default.

POC Sports NA ONLY/eyefitu-sizing.liquid

CSS custom styles to make EyeFitU compatible with POC's UI.

POC Sports/eyefitu-styles.liquid

POC Sports/eyefitu-sizing.liquid



This code sets the flow and default gender of the eyefitu shopify options to "poc" and "male", respectively.

POC Sports/eyefitu-custom.liquid



var Header = require('./components/Header');
Header.init = function() { this.

class Header

GAECO-7378

Scientific Plots

matplotlib

config mpl default settings


The code exports a friendbookApi object that you can use to create an Api object. The friendbookApi object has the following properties:

 reducerPath: This is the path to the reducer that you want to use.

baseQuery: This is the query that you want to use to find all the pages in your friendbook.

friendbookApi.js


This code will export a new store with the configured reducer and middleware. It will also add a getDefaultMiddleware function to the store. This function will concatenate all the middleware specified in the friendbookApi.middleware property.

store.js



The code uses the & operator to specify that the condition is logical AND. df2 is a dataframe that contains only columns that have both the conditions met.

Filter Pandas Dataframe by multiple conditions



This line fills in missing values in Column with the value of replace.

Replace NA values in a Pandas column

Pandas

Imputation using central tendency



The splitfolders.ratio function takes two arguments: input_directory, the location of the dataset, and output_directory, the output location. The first argument is the location of the dataset, and the second argument is the location of the output. The splitfolders.ratio function calculates the ratio of the number of files in the input_directory to the number of files in the output_directory. The function then sets the ratio to the first argument (in this case, .7) plus the second argument (.2), and sets the group_prefix to None. If the input_directory does not exist, the splitfolders.ratio function creates it. If the output_directory does not exist, the splitfolders.ratio function creates it and sets the move parameter to True.

Split folders



The code arr = np.loadtxt("sample_data.csv", delimiter=",", dtype=str) creates an array of objects which have the following attributes: 

- name: array containing the column names in the file sample_data.

Loading data Numpy


This function takes a spellbook as input and returns an array of strings. Each string in the array is a result of applying the spell to itself. If a spell is deemed to be awesome, then it will be added to the result array and returned.

Test1



Dashboard is a React component.

The code starts by getting the user's authentication state. It uses useAuthState to get the user and loading and error . Next, it uses useState to set the name and setName to an empty string.

Next, it uses useNavigate to set up a fetchUserName function. This function will query the users collection and return the user's data. If there is an error, the error will be logged and the button will be disabled.

The last part of the code is the useEffect . This function will execute if the loading variable is true . If the user is not logged in, it will navigate to the / page. Finally, the fetchUserName function will be executed.

firebaseDashboard.js



This code creates a reset button and a div that holds a text box and a button. When the user clicks the button, the code calls the sendPasswordResetEmail function with the user's email address as the argument. The sendPasswordResetEmail function sends a password reset email to the user.

firebaseResetPassword.js



The code registers a new user with their name, email address, and password. It also uses the useState() and useAuthState() functions to set the user's name, email address, and authentication state, respectively. Finally, the useEffect() function is used to trigger a response based on the user's authentication state.

If the user is not registered, an alert box is displayed with a link to sign in. If the user is already registered, the code displays a message confirming the login.

firebaseRegister.js




The useEffect function will be called when the DOM is ready. The function first checks to see if loading is true. Loading will be false if the user has logged in.

Next, the useAuthState function is called to get the current user state. The user state is used to construct the HTML for the login form.

The useNavigate function will be called when the user clicks on either of the login buttons. The function first sets the state of the buttons to login and google, respectively. Then, the function calls signInWithEmailAndPassword with the user's email address and password.

firebaseLogin.js

firebase.js



The code will create a split folder for every N files in the dataset given as input. The output folder will be named "mydrive" and the ratio of the size of the splitted folder will be (.7, .2, .1).

Loading data pandas



The code above defines a function called findTheDifference which takes two strings as input and performs a simple comparison between the values in the two input arrays. If the strings don't match, the function returns the characters in the tSplit array that aren't matched by the sSplit array.

findTheDifference.js



The code creates a drop-down menu using the WordPress nav_menu() function. The first parameter is the container in which the menu will be displayed, in this case a div. The second parameter is the container_class, which is set to tt-collapse-content. This class will make the menu dropdown appear as a collapsed toolbar at the bottom of the page. The third parameter is the menu_class, which is set to tt-list. This class will make the menu act like a list of posts. The final parameter is the theme_location, which is set to footer_menu_categories. This will ensure that the menu is displayed in the footer of the site.

wp_nav_menu



<label for="textInput">Text input:</label>

<input type="text" id="textInput">

</div>



This code will create a label for the text input and an input to capture the user's input.

Snippet1

Fetch Get with cookies


The code above defines an entity adapter that will allow us to retrieve users by their id, name, or username. The adapter also has a selector to filter by the user's id. The adapter also exports selectors to get all users, select a specific user by id, select id's, select entities, and select the total number of users.

usersNewSlice




Component.prototype.setState = function(update, callback) {
  // only clone state when copying to nextState the first time.
  let s;
  if (this._nextState != null && this._nextState !== this.state) {
  s = this._nextState;
  } else {
  s = this._nextState = assign({}, this.state);
  }

  // Skip update if updater function returned null
  if (update == null) return;

  if (this._vnode) {
  if (callback) {
    this._stateCallbacks.push(callback);
  }
  enqueueRender(this);
  }
};


Component.prototype.setState = function(update, callback) {
  // only clone state when copying to nextState the first time.
  let s;
  if (this._nextState != null && this._nextState !== this.state) {
  s = this._nextState;
  } else {
  s = this._nextState = assign({}, this.state);
  }

  // Skip update if

setState function



This code opens the file "filename" in read mode and sets the encoding to "utf-8". It then reads lines from the file and prints each one to the console.

mingmu's template

python test



The code selects an option from a drop-down list by using a query string. The value attribute sets the option’s value. The required attribute tells the browser that this select box is required, and the option attribute sets the option’s text.

HTML dropdown element


#include <ext/pb_ds/elem_attribute.hpp>
#include <ext/pb_ds/lob_container.hpp>

#define DISTINCT_KEY false

using namespace std;

int main()

{

Set<int> set = {1, 2, 3};

cout << "Set contains: " << set.size() << endl;

if (!DISTINCT_KEY)

{

map<int, int>::iterator mi = set.begin();

while (mi != set.end())

{

cout << *mi << " ";

mi++;

}

}

else

{

map<int, int>::iterator mi = set.find(DISTINCT_KEY);

if (mi != set.

library_input


You are executing the following code in a text editor to view the file "info.html" in the "base" theme:

cd /opt/jboss/themes/base/login nano info.

Keycloak add redirect after change password



In this code, "microdnf install nano" installs the nano text editor.

Name	Language	Author	Uses
rotate.js	JavaScript	RN Rahman Niftaliyev	0
generateParenthesis.js	JavaScript	RN Rahman Niftaliyev	0
1D_DP_template	C++	a abhinavmaurya747	0
Sort a Pandas Dataframe Colum	Python	JP Javier Pacheco	0
useInterval	JavaScript	m maidangzhu	0
React hooks counter	JavaScript	m maidangzhu	0
Find Device HostName and Ipv4 address	C#	KY Kenan Yusubov	0
Youtube dl téléchargement audio en simultané	Shell	YB Yannick Bétemps	0
flrecomm	HTML	FR Felipe Ruela	0
blome-snippet	HTML	FR Felipe Ruela	0
Time Spent on Website	JavaScript	FK Felix Kaboto	0
Replace column name on Pandas Dataframe	Python	JP Javier Pacheco	0
Postgres cheat sheet	Shell	N Neuron123	0
Postgres dump data(NOT in container)	Shell	N Neuron123	0
hello	Python	AE Abdulaziz Ebrahim	0
Postgres dump data in container	Shell	N Neuron123	0
POC Sports NA ONLY/eyefitu-sizing.liquid	JavaScript	DG Dmitry Gurendo	0
POC Sports/eyefitu-styles.liquid	CSS	DG Dmitry Gurendo	0
POC Sports/eyefitu-sizing.liquid	JavaScript	DG Dmitry Gurendo	0
POC Sports/eyefitu-custom.liquid	JavaScript	DG Dmitry Gurendo	0
class Header	JavaScript	AB Al Bor	5
GAECO-7378	SQL	OC Otávio Coelho	0
config mpl default settings	Python	A AdamZh0u	6
friendbookApi.js	JavaScript	RN Rahman Niftaliyev	0
store.js	JavaScript	RN Rahman Niftaliyev	0
Filter Pandas Dataframe by multiple conditions	Python	JP Javier Pacheco	0
Replace NA values in a Pandas column	Python	JP Javier Pacheco	0
Imputation using central tendency	Python	WS Wyx Smrf	0
Split folders	Python	kn kamoni njoki	0
Loading data Numpy	Python	kn kamoni njoki	0
Test1	Python	JW Jiang Wei	0
firebaseDashboard.js	JavaScript	RN Rahman Niftaliyev	0
firebaseResetPassword.js	JavaScript	RN Rahman Niftaliyev	0
firebaseRegister.js	JavaScript	RN Rahman Niftaliyev	0
firebaseLogin.js	JavaScript	RN Rahman Niftaliyev	0
firebase.js	JavaScript	RN Rahman Niftaliyev	0
Loading data pandas	Python	kn kamoni njoki	0
findTheDifference.js	JavaScript	RN Rahman Niftaliyev	0
wp_nav_menu	PHP	AB Al Bor	4
Snippet1	HTML	P Prosenjit Gain	0
Fetch Get with cookies	JavaScript	RF RF Fahad Islam	0
usersNewSlice	JavaScript	RN Rahman Niftaliyev	0
setState function	JavaScript	m maidangzhu	0
mingmu's template	Python	TL Tree Lemmon	0
python test	Python	DD Denys Duvinskyi	0
HTML dropdown element	HTML	b benjaminbilgehan	0
library_input	C++	NG Nikita Grivin	1
Keycloak add redirect after change password	Python	N Neuron123	0
Install nano in docker redhat container	Shell	N Neuron123	0
jun88	TypeScript	TK TRAN KIM HOA	0

Codiga Snippets, page 18